YTS45E

Twin-lift

With the Bromma all electric adjustable twinlift spreader YTS45E a larger percentage of above-deck containers can be transported in twinlift mode.

The twinlift spreader can move two 20 foot containers from a spacing of 0 to 1.6 metres (0 to 5 foot) under full load while suspended under the twistlocks.

Two containers can be moved synchronised towards one another and apart from one another. The movements can be done at anytime in the crane cycle and are mechanically controlled to be symmetrical. There is no stopping time to change the container spacing.

The telescopic spreader YTS45E is of rectangular frame construction enabling easy location on containers. The spreader is as standard equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for heavy lifts and for handling damaged containers.

The design with recessed end beams makes handling of lashing frames and hatch covers possible. All motions of the spreader are controlled from the driver’s cab and there are provisions made for signals in the cab indicating the position of the twistlocks and landing pin status.

All movements of the YTS45E are electrically driven. This means that the speader is silent and consumes energy only when moving. Made of high quality steel, the standard YTS45E spreader provides high lifting capacity with a low nominal tare weight thanks to the box design of the telescoping beams and the main frame. The spreader is designed in accordance with DIN 15018 H2B4. All components can be easily assembled, adjusted, removed and are accessible for inspection and maintenance.

The spreader comes with the SCSł, reducing and preventing downtime through improvements in the area of electrical connections. It will also shorten downtime through faster spreader fault diagnostics.

Major features:

Two 20’ containers can be moved apart from 0 to 1.6 metres (0’–5’) under full load
Environmental friendly due to its all electric design
Advanced SCSł communications system reduces downtime considerably
Fast trouble shooting
Fulfils the design criteria among DIN 15018 H2B4, FEM 1.001 and British Standard BS 2573

Technical specifications

YTS45E all-electric separating twin-lift spreader

LIFTING CAPACITY (According to DIN 15018 H2B4)	One container 51 tonnes (50 LT) ± 10% eccentric loading Twinlift of two 20’ containers 2 x 32.5 tonnes (32 LT) evenly loaded Lifting lugs 4 x 10 tonnes in the main frame and end beams
SEPARATING CAPACITY	0-1600 mm with full load
WEIGHT	10,5 tonnes (without extra equipment)
TELESCOPIC MOTION	From 20’ to 45’ in approximately 30 seconds
TWISTLOCK ROTATION	90° in approximately 1 second
TWINLIFT UNIT UP/DOWN	Approximately 6 seconds
TWIN EXPAND/RETRACT	Approximately 18 seconds
POWER SUPPLY	400/230 VAC 50 Hz or otherwise as agreed
MAX POWER CONSUMPTION	7.5 kW
CONTROL SYSTEM	SCSł Spreader Control System
CONTROL VOLTAGE	24 VDC
ELECTRICAL CABINET	Stainless steel IP66
SURFACE CONDITIONING	Sand-blasted SA 2.5 50 microns 2-component zinc epoxy 70 microns 2-component MIO epoxy 40 microns 2-component acrylic epoxy 40 microns 2-component acrylic epoxy
DESIGN CRITERIA	DIN 15018 H2B4, FEM 1.001, British Standard BS 2573
MANUALS	Full service and repair manual supplied
WARRANTY	One year

This specification is subject to alterations without prior notice.