The telescopic spreader is of a rectangular frame construction enabling easy location on containers. The spreader is as standard equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for heavy lifts and for handling damaged containers. The spreader can adjust its length to
lift 20 foot, 30 foot (option), 40 and 45 foot containers using ISO floating twistlocks.
The spreader can retract to the 19 foot–6 inch position in case it becomes jammed in the ship’s 20 foot cell. The design with recessed end beams makes handling of lashing frames and hatch covers possible. All motions of the spreader are controlled from the driver’s cab and there are provisions made for signals in the cab indicating the position of the twistlocks and landing pin status.
All movements of the SSX45E are electrically driven. This means that the speader is silent and consumes energy only when moving.
Made of high quality steel, the standard SSX45E spreader provides high lifting capacity with a low nominal tare weight thanks to the box design of the telescoping beams and the main frame. The spreader is designed in accordance with DIN 15018 H2B4. All components can be easily assembled, adjusted, removed and are accessible for inspection and maintenance.
The spreader comes with the SCS³ Spreader Control System, reducing and preventing downtime through improvements in the area of electrical connections. It will also shorten downtime through faster spreader fault diagnostics.
(According to DIN 15018
Twistlocks 41 tonnes evenly loaded
|WEIGHT||9,5 tonnes (without extra equipment)|
|TELESCOPIC MOTION||From 20' to 45' in approximately 30 seconds|
|FLIPPER ARM SPEED||180° in 3-5 seconds|
|TWISTLOCK ROTATION||90° in approximately 1 second|
|POWER SUPPLY||400/230 VAC 50 Hz or otherwise as agreed|
|POWER CONSUMPTION||0-7,5 kW|
|CONTROL SYSTEM||SCS³ Spreader Control System|
|CONTROL VOLTAGE||24 VDC|
|ELECTRICAL CABINET||Stainless steel IP66|
|SURFACE CONDITIONING||Sand-blasted SA 2.5|
50-90um –2 component Zinc epoxy
100um -2-component MIO pigmented
70um – Polyurethane
|DESIGN CRITERIA||DIN 15018 H2B4, FEM 1.001, British Standard BS 2573|
|MANUALS||Full service and repair manual supplied|
This specification is subject to alterations without prior notice.