RSX40C combi spreader
RSX40C combi spreader
Reach stacker spreader
Reach stacker spreader
|
Front page
|
Keeps you updated
|
Why Bromma is leading
|
Spreaders & options
|
What we can do
|
Articles and videos
|
Find your contact
|
Buy original spare parts
|
|
The Bromma RSX40C is a telescopic top lift combined container/trailer handling spreader for the handling of single ISO or Binnen containers, trailers or swap bodies with reach stackers.
The spreader can adjust its length to lift containers from 20’ to 40’ using ISO floating twistlocks. It also features grapple arms to lift trailers, swap bodies (C715, C745) and bottom lifting containers. Powered Pile Slope (PPS), tilt (optional), rotation and side shift features enable easy location onto containers or near pick-up points achieved with smooth control technology.
The telescopic spreader is of a monobeam frame construction designed to absorb both vertical and horizontal forces. Four ISO twistlocks engage the containers top apertures and lock into the corner castings. As standard, the spreader is equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for handling damaged containers or special cargoes.
Four grapple arms distant from 4876 mm according to the European standards can be used to lift trailers or swap bodies up to 9’6’ high and 2,6 m wide.
The RSX40C is controlled with 24 VDC solenoid operated valves and inductive proximity sensors. The electrical system is designed to ensure maximum safety during operation. All motions of the spreader are controlled from the driver’s cab over serial communication (CANopen) or parallel wiring (optional) and all commands are processed safely by the spreader Electronic Control Unit (ECU). Lifting allowance is monitored by the ECU and implemented on the reach stacker to ensure safe container handling. In addition, the onboard ECU offers self-diagnostic technology, derived from Bromma’s innovative SCS³ crane spreader control system.
Made of high quality steel and components, the RSX40C spreader achieves greater performances with lower tare weight, extended service intervals and longer likely replacement cycles. Available with several options, the Bromma RSX40C will enhance driver’s experience for a maximum productivity.
The telescopic spreader is of a monobeam frame construction designed to absorb both vertical and horizontal forces. Four ISO twistlocks engage the containers top apertures and lock into the corner castings. As standard, the spreader is equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for handling damaged containers or special cargoes.
Four grapple arms distant from 4876 mm according to the European standards can be used to lift trailers or swap bodies up to 9’6’ high and 2,6 m wide.
The RSX40C is controlled with 24 VDC solenoid operated valves and inductive proximity sensors. The electrical system is designed to ensure maximum safety during operation. All motions of the spreader are controlled from the driver’s cab over serial communication (CANopen) or parallel wiring (optional) and all commands are processed safely by the spreader Electronic Control Unit (ECU). Lifting allowance is monitored by the ECU and implemented on the reach stacker to ensure safe container handling. In addition, the onboard ECU offers self-diagnostic technology, derived from Bromma’s innovative SCS³ crane spreader control system.
Made of high quality steel and components, the RSX40C spreader achieves greater performances with lower tare weight, extended service intervals and longer likely replacement cycles. Available with several options, the Bromma RSX40C will enhance driver’s experience for a maximum productivity.
Major features:
- Low tare weight for high performances
- Smooth control technology
- 20’ to 40’ at maximum speed with dampening
- Floating ISO twistlocks
- Grapple arms with block stacking
- ±800mm side shift
- -195°/+105° rotator
- ±5° PPS
- Full CANopen bus integrated management
- Longer service intervals
- Faster diagnostics
Technical specifications
RSX40C reach stacker combi spreader.
|
LIFTING CAPACITY (SWL) |
45 t up to ±10% eccentric loading 4 x 10 t with lifting lugs on twistlocks endbeams |
| TARE WEIGHT (TW) | 12’200 kg approximately, without extra equipment |
| ISO FLOATING TWISTLOCKS | 90° in less than 1,5 sec, mechanical & electrical safety interlock system |
| GRAPPLE ARMS | 2 pairs with block stacking analogue sensing of arms position up or down in less than 20 sec |
| TELESCOPING |
20’ to 40’ in less than 15 sec analogue sensing of telescoping positions and dampening with maximum speed |
| ROTATION | -195°/+105° in less than 50 sec with smooth control technology |
| SIDESHIFT | ±800 mm in less than 15 sec with smooth control technology |
| MECHANICAL PILE SLOPE | ±5° |
| ELECTRICS |
24 VDC control voltage Electronic Control Unit with diagnostic technology Serial interface CANopen according to CiA DS 444 profile 4 working lights 70W each |
| HYDRAULICS | 70-90 l/mn at 160 bar ISO cleanliness rating 18/16/13 (ISO 4406) |
| SURFACE CONDITIONING | PUR RAL 7021 (black grey) 120/2 FeSA2,5 with gloss grade 30±5 for a corrosion protection classification C3L/C2M according to EN - ISO 12944 |
An extensive list of options enables you to adapt the spreader more precisely to your needs. Further information is available on request. This specification is subject to alterations without prior notice.
