RSX40
RSX40
Reach stacker spreader
Reach stacker spreader
|
Front page
|
Keeps you updated
|
Why Bromma is leading
|
Spreaders & options
|
What we can do
|
Articles and videos
|
Find your contact
|
Buy original spare parts
|
|
The Bromma RSX40 is a telescopic top lift spreader for the handling of single ISO and Binnen containers with reach stackers.
The industry must innovate to address container handling demand and this is just what Bromma did with the RSX40 - it is set to revolutionize the way drivers operate with the spreader increasing efficiency and productivity for a minimized total cost of ownership.
The spreader can adjust its length to lift containers from 20’ to 40’ using ISO floating twistlocks. Mechanical Pile Slope (MPS), tilt (optional), rotation and side shift features enable easy location onto containers achieved with smooth control technology.
The telescopic spreader is of a monobeam frame construction designed to absorb both vertical and horizontal forces. Four ISO twistlocks engage the containers top apertures and lock into the corner castings. As standard, the spreader is equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for handling damaged containers or special cargoes.
The RSX40 is controlled with 24 V DC solenoid operated valves and inductive proximity sensors. The electrical system is designed to ensure maximum safety during operation. All motions of the spreader are controlled from the driver’s cab over serial communication (CANopen) or parallel wiring (optional) and all commands are processed safely by the spreader Electronic Control Unit (ECU). Lifting allowance is monitored by the ECU and implemented on the reach stacker to ensure safe container handling. In addition, the onboard ECU offers self-diagnostic technology, derived from Bromma’s innovative SCS3 crane spreader control system.
Made of high quality steel and components, the RSX40 spreader achieves greater performances with lower tare weight, extended service intervals and longer likely replacement cycles. Available with several options, the Bromma RSX40 will enhance driver’s experience for a maximum productivity.
The spreader can adjust its length to lift containers from 20’ to 40’ using ISO floating twistlocks. Mechanical Pile Slope (MPS), tilt (optional), rotation and side shift features enable easy location onto containers achieved with smooth control technology.
The telescopic spreader is of a monobeam frame construction designed to absorb both vertical and horizontal forces. Four ISO twistlocks engage the containers top apertures and lock into the corner castings. As standard, the spreader is equipped with 4 x 10 tonnes lifting lugs in the corners of the end beams for handling damaged containers or special cargoes.
The RSX40 is controlled with 24 V DC solenoid operated valves and inductive proximity sensors. The electrical system is designed to ensure maximum safety during operation. All motions of the spreader are controlled from the driver’s cab over serial communication (CANopen) or parallel wiring (optional) and all commands are processed safely by the spreader Electronic Control Unit (ECU). Lifting allowance is monitored by the ECU and implemented on the reach stacker to ensure safe container handling. In addition, the onboard ECU offers self-diagnostic technology, derived from Bromma’s innovative SCS3 crane spreader control system.
Made of high quality steel and components, the RSX40 spreader achieves greater performances with lower tare weight, extended service intervals and longer likely replacement cycles. Available with several options, the Bromma RSX40 will enhance driver’s experience for a maximum productivity.
Major features:
- Low tare weight for high performances
- Smooth control technology
- 20’ to 40’ at maximum speed with dampening
- Floating ISO twistlocks
- ±800mm side shift
- -195°/+105° rotator
- ±5° MPS
- Full CANopen bus integrated management
- Longer service intervals
- Light but robust thanks to well proven design for a long economic life
Technical specifications
RSX40 reach stacker spreader
|
LIFTING CAPACITY (SWL) |
45 t up to ±10% eccentric loading 4 x 10 t with lifting lugs on twistlocks endbeams |
| TARE WEIGHT (TW) | 7,600 kg approx. (without extra equipment) |
| ISO FLOATING TWISTLOCKS | 90° in less than 1,5 sec, mechanical & electrical safety interlock system |
| TELESCOPING |
20’ to 40’ in less than 15 sec analogue sensing of telescoping positions and dampening with maximum speed |
| ROTATION | -195°/+105° in less than 50 sec with smooth control technology |
| SIDESHIFT | ± 800 mm in about 15 seconds with smooth control technology |
| MECHANICAL PILE SLOPE | ±5° |
| ELECTRICS |
24 VDC control voltage Electronic Control Unit with diagnostic technology Serial interface CANopen according to CiA DS 444 profile 2 working lights 70W each |
| HYDRAULICS | 70-90 l/mn at 160 bar ISO cleanliness rating 18/16/13 (ISO 4406) |
| SURFACE CONDITIONING | PUR RAL 7021 (black grey) 120/2 FeSA2,5 with gloss grade 30±5 for a corrosion protection classification C3L/C2M according to EN - ISO 12944 |
An extensive list of options enables you to adapt the spreader more precisely to your needs. Further information is available on request. This specification is subject to alterations without prior notice.
