OSR45 Overheight frame
The OSR45 Overheight Frame is attached under any parent spreader with ISO standard base measure and equipped with overheight frame lifting lugs. The cargo is lifted by the twistlocks of the spreader, the overheight frame twistlocks act as “extended legs” to the spreader. This means a much faster and safer handling of goods than with chains.
As the spreader telescopes, the overheight frame telescopes simult- aneously, allowing the unit to handle 20, 30, 40 and 45 foot containers with overheight cargo. The OSR45 Overheight Frame is only mechanically operated and requires no power supply or hydraulics, neither for attaching nor operation.
The OSR45 can be delivered in a standard 20 foot container for easy on-site mounting, thus reducing transportation costs. The overheight frame can be fast and automatically connected and disconnected to the storage fixture. The fixture can be placed on the ground or attached to the crane legs. It can also be moved using a fork lift.
Made of high quality steel, the OSR45 provides high lifting capacity with a low nominal tare weight. The overheight frame is designed in accordance with DIN 15018 H2B3. All components can be easily assembled, adjusted, removed and are accessible for inspection and maintenance.
| LOAD CAPACITY SWL |
51 tonnes evenly loaded 51 tonnes ± 10% eccentric loading |
| WEIGHT | Overheight frame: 2,4 tonne Storage fixture: 1,6 tonne |
| LENGTH | 20', 30', 40' and 45' containers |
| OVERHIGHT CAPACITY | Cargo extending up to 2.500 mm above the corner boxes |
| CONNECTION TO SPREADER |
Twistlock (with cargo) Latches (without cargo) |
| SURFACE CONDITIONING |
Sand-blasted SA 2.5 50 microns 2-component zinc epoxy 70 microns 2-component zinc MIO epoxy Two layers 40 microns 2-component acrylic epoxy. |
| WARRANTY | One year |
This specification is subject to alterations without prior notice.